欢迎您访必博体育官方网站
banner
美国柏勒夫Marsh

 

Type 5000

Type 5000

产品详细

Type 5000 P/I Transducers
  • 0.1% accuracy typical
  • Piezo resistive pressure sensor resists vibration
  • Mounts at any angle
  • Easily accessible zero and span adjustments
  • NEMA 4X housing approved for explosion proof service
Product Detail:

The Type 5000 series is a compact, rugged and reliable family of two-wire pressure transmitters designed for industrial field service. These instruments convert a signal pressure input into a precise 4-20 or 10-50mA output. The lightweight transmitter housing includes a 1/4 NPT pressure port and a 1/2 NPT conduit port for field wiring. Connections are easily accessible simply by removing the top cover. Zero and span adjustments are available within the field wiring compartment for fine, on-site calibration adjustment. The Type 5000 uses a unique, temperature compensated piezo resistive sensor suitable for gauge pressure measurement of non-corrosive liquids and gases. The sensor has excellent dynamic response and is virtually insensitive to mounting orientation and ordinary industrial vibration. Mounting holes on the transmitter housing are arranged to permit direct pipe (2") mounting for minimum installed cost.

NEMA 4X Enclosure
The Type 5000 transducers have been certified by Factory Mutual Research as meeting the requirements for NEMA 4X (water tight, dust and corrosion resistant).

The transducers also have Factory Mutual approvals for:

  1. Explosion proof service (Class 1, Divisions 1 and 2, Groups B, C & D)
  2. Dust ignition proof service (Class II, Divisions 1 and 2, Groups E, F & G)
  3. Class III, Divisions 1 and 2. Equivalents to the above approvals have been obtained from the Canadian Standards Association.
Part Numbers:
Create Part Number:
9
6
4
X
X
1
0
XX
 
0
  0-15 psig (0-1.0 BAR) Input
1
  3-15 psig (0.2-1.0 BAR)
2
  3-27 psig (0.2-1.9 BAR)
3
  6-30 psig (0.4-2.1 BAR)
4
  0.2-1.0 BAR (3-15 psig)
5
  0-100 psig (0-6.9 BAR)
 
0
  4-20 mA Output
1
  10-50 mA
 
1
  X/P FM/CSA Agency Approval
 
00
None Options
06
Pipe Clamp Mounting Kit
Options:
Consult Factory.

 


分享到:

 

 

上一条:Type 3512/3522  

下一条:Type 10

点击次数:点击代码  更新时间:2011-9-30 20:28:20  【打印此页】  【关闭

 

 

 

二维码

 

必博体育 | 网站地图 Copyright 2016 必博体育 版权所有 | 网站建设信和网络

在线客服

在线招商
点击这里给我发消息
产品咨询
点击这里给我发消息
产品咨询
点击这里给我发消息