欢迎您访必博体育官方网站
banner
美国柏勒夫Marsh

 

Type 1000

Type 1000

产品详细

产品介绍
 
 
Type 1000
 
Type 1000 I/P & E/P Transducers
  • Low Cost
  • Built-in Volume Booster
  • Small Size
  • Field Reversible
  • Low Air consumption
  • Mounts at Any Angle
  • Convenient External Span & Zero Adjusts
    (Except for Explosion Proof Models)
  • Light Weight
  • Wide Supply Pressure Range
  • Low Supply Pressure Sensitivity
Product Detail:
The Type 1000 Transducer is an electro-pneumatic device that reduces a supply pressure to a regulated output pressure directly proportional to an electrical input signal. The Type 1000 accepts a wide range of supply pressures, ranging from a minimum of 3 psig (0.2 BAR) above the maximum output up to 100 psig (6.9 BAR). An integral pneumatic volume booster is included in the design to provide high flow capacity (up to 12 SCFM/339 slpm). Model selections include general purpose, NEMA 4X Type, extended range, high relief, intrinsically safe, and explosion proof.
Part Numbers:
T-1000 General Purpose ordering information:
Input
Output*
Part Number
Impedance
(nominal)
psig
BAR
4-20mA
3-9
0.2-0.6
961-072-000
90Ω
9-15
0.6-1.0
961-073-000
90Ω
3-15
0.2-1.0
961-070-000
180Ω
3-27
0.2-1.9
961-074-000
220Ω
6-30
0.4-2.1
961-075-000
220Ω
1-17
0.07-1.2
961-116-000
250Ω
3-15
0.2-1.0
961-089-000
180Ω
10-50mA
3-15
0.2-1.0
961-076-000
70Ω
3-27
0.2-1.9
961-077-000
85Ω
6-30
0.4-2.1
961-078-000
85Ω
0-5V
3-15
0.2-1.0
961-079-000
615Ω
3-27
0.2-1.9
961-080-000
530Ω
6-30
0.4-2.1
961-081-000
530Ω
1-9V
3-15
0.2-1.0
961-085-000
985Ω
3-27
0.2-1.9
961-086-000
840Ω
6-30
0.4-2.1
961-087-000
840Ω
NOTE: For NEMA4X, add 004 suffix.
T-1000 extended range ordering information:
Input
Output*
Part Number
Impedance
(nominal)
psig
BAR
0-60mA
2-120
0.1-8.3
961-107-000
220Ω
4-20mA
3-120
0.2-8.3
961-111-000
260Ω
2-60
0.1-4.1
961-117-000
225Ω
0-10V
3-120
0.2-8.3
961-112-000
805Ω
0-5V
2-60
0.1-4.1
961-118-000
500Ω
T-1000 HIGH RELIEF ordering information:
Input
Output*
Part Number
Impedance
(nominal)
psig
BAR
4-20mA
3-9
0.2-0.6
961-130-000
90Ω
9-15
0.6-1.0
961-131-000
90Ω
3-15
0.2-1.0
961-132-000
180Ω
3-27
0.2-1.9
961-133-000
220Ω
6-30
0.4-2.1
961-134-000
220Ω
3-15
0.2-1.0
961-135-000
180Ω
1-17
0.07-1.2
961-136-000
250Ω
10-50mA
3-15
0.2-1.0
961-137-000
70Ω
3-27
0.2-1.9
961-138-000
85Ω
6-30
0.4-2.1
961-139-000
85Ω
* For output pressures less than 3 psi (0.2 BAR) or greater than 30 psi (21 BAR), the Type 1000 transducer can be coupled to Bellofram Type 75 pneumatic relay. Consult Applications Engineers for further information.
** NEMA 4 type enclosure option available on all input/output ranges. This option is separate from explosion proof, NEMA 4 units.

Type 1000 Explosion Proof
Input
Output*
Part Number
Impedance (nominal)

Agency Approvals
(see notes)

psig
BAR
4-20mA
3-15
0.2-1.0
961-098-000
180Ω
Explosion-Proof, Factory Mutual1
3-15
0.2-1.0
961-098-100
180Ω
CSA Explosion Proof
1-9v
3-15
20-100
961-142-000
985Ω
Explosion Proof Factory Mutual1
Type 1000 Intrinsically Safe
4-20mA 3-15 0.2-1.0 961-099-000
180Ω
Intrinsically Safe, Factory Mutual3,4
3-27 0.2-1.9 961-100-000
220Ω
Intrinsically Safe, Factory Mutual3,4
3-15 0.2-1.0 961-105-000
180Ω
Intrinsically Safe, CSA5
3-27 0.2-1.9 961-106-000
220Ω
Intrinsically Safe, CSA5
6-30 0.4-2.1 961-101-000
220Ω
Intrinsically Safe, Factory Mutual3,4
15-3 1.0-0.2 961-175-000
180Ω
Intrinsically Safe, Factory Mutual3,4
27-3 1.9-0.2 961-176-000
220Ω
Intrinsically Safe, Factory Mutual3,4
30-6 2.1-0.4 961-177-000
220Ω
Intrinsically Safe, Factory Mutual3,4
*For output pressures less than 3 psi or greater than 30 psi the Type 1000 transducer can be coupled to Bellofram Type 75 pneumatic relay.  Consult application engineers for further information.

Agency Approval Notes:

  1. The Type 1000 Explosion-Proof Transducer has been submitted, tested and approved by Factory Mutual Research for use in hazardous locations for Class I, Division 1, Group D, Class II, Division 1, Groups E, F & G and Class III requirements. It also has been approved to meet NEMA 4 Outdoor requirements.
  2. Canadian Standards Association certified for hazardous locations: Class I, Group D, Class II, Groups E, F and G, Class III, CSA Enc. 4.
  3. Factory Mutual Research Approved as intrinsically Safe for Class I, II, III, Division 1, Groups A, B, C, D, E, G when installed in accordance with interconnection diagram No. 541-000-012 and with the proper energy limiting barriers.
  4. Factory Mutual Research Approved as nonincendive for Class I, Division 2, Groups A, B, C, D, and suitable for Class II and III, Division 2, Group G. Barriers are not required for nonincendive rating.
  5. Canadian Standards Association certified as intrinsically safe when connected through certified diode safety barriers in accordance with Bellofram Installation Instruction 541-000-012.

Explosion proof, intrinsically safe, and non-incendive ratings are not affected by recalibrating for split range or reverse acting applications.
The Bellofram T-1000 Transducers were tested and found to comply with Electromagnetic compatibility Directive effective January 1, 1996. The relevant EMC specifications tested were the following: EN 50081-1 (1992) and EN 50082-1 (1992). A Technical Construction File, Serial #107 was written and Certificate of Conformity issued by a Competent Body.

Options:
Option Part Number/Last 3 digits
Explosion Proof Mounting Kit 971-079-000
Explosion Proof Panel Mounting Kit 971-078-000
DIN Rail Kit 010-115-000
Hirschman Connector Kit (3-prong) 971-126-000
Filter Kit, Coalescing, 0.1 micron 010-140-000
Filter Element Kit
(for coalescing filter, package of 10)
010-141-000
Output Gauges–Option “8” last 3 digits become - 008
Dielectric Strength Testing Option “12” last 3 digits become - 012
NEMA 4X Type Enclosure Option: Option “4” last 3 digits become - 004**
** NEMA 4 type enclosure option available on all input/output ranges. This option is separate from explosion proof, NEMA 4 units.

 


分享到:

 

 

上一条:没有了!  

下一条:Type 1001

点击次数:点击代码  更新时间:2011-9-30 20:28:20  【打印此页】  【关闭

 

 

 

二维码

 

必博体育 | 网站地图 Copyright 2016 必博体育 版权所有 | 网站建设:信和网络

在线客服

在线招商
点击这里给我发消息
产品咨询
点击这里给我发消息